website
+1 (972) 476-1899
| Part Number | AD8-16 |
|---|---|
| Manufacturer | ACCES I/O PRODUCTS |
| Category | ANALOG INPUT » ISA BUS |
| Price | Request Quote |
| Lead Time | Request Quote |
Eight-Bit 16-Input A/D and Counter/Timer Card
Once you accept your quote and confirm your order, we prepare by retrieving related parts and components from our inventory. Anything we do not currently have in stock is sourced.
Upon receipt, all parts are visually inspected for damage and then photographed to document their condition. Parts acquired from vendors must meet our quality standards.
Industrial computer boards and other parts we are equipped to evaluate are tested to verify functionality and discover possible damage.
Industrial computer boards have all components with low MTBF numbers (such as capacitors and connectors) replaced and are washed in our PCB cleaner to remove dust and grime.
Industrial computer boards are fully diagnosed and repaired by our engineers. Logs of the problems encountered and solutions implemented are recorded.
Industrial computer boards have all I/O connections rigorously tested to ensure that everything is working properly before the board is certified as ready to ship.
After photos are taken to document the exterior condition of the part, it is packaged and sent to the customer. ESD-safe materials are used to protect sensitive equipment on its journey.
Elite.Parts is a website of GID Industrial, an ISO 9001:2015-certified company that has specialized in servicing industrial computer boards and providing other industrial products for sectors including manufacturing, defense, aerospace, entertainment, healthcare, and more by utilizing our combined skills and vast international network of trusted suppliers since our founding in 2015.
Do you need an AD8-16? We can help you find it at a competitive price!
| AT Mode | No. of Channels: Eight differential or 16 single-ended inputs. Voltage Ranges: Software selectable, ±128 mV or 0-255 mV w/1 mV resolution, ±5V or 0-10V w/39 mV resolution. Overvoltage Protection: ±40 VDC, single channel. Input Impedance: 10 Megohm Accuracy: ±0.4% ±1 count. Linearity: ±1 count. Resolution: 8 bit binary. Temperature Coefficient: Zero and gain stability each ±1 LSB over full operating temperature range. Throughput: 16,600 conversions/second maximum. |
|---|---|
| ATX Mode | No. of Channels: 2 Output Voltage Range: ±10 VDC. Resolution: 8 bit binary. Output Load: 5 mA maximum. Accuracy: ±0.4% ±1 bit. |
| Compliance | This product is in full compliance with CE requirements. |
| Connector | No. of Counters: Three independent, 16-bit, fully programmable. Clock: Either internal derived from computer clock (or color oscillator frequency) divided by 1/2, 1/4, 1/8, or 1/16 or from external clock source. Drive Capability: 5 LSTTL loads. (2.2 mA at 0.45 VDC). Input Load (Gate and Clock): ±10 mA, TTL/CMOS compatible. Input Clock Frequency:10 MHz max. Active Count Edge:Negative edge. Clock Pulse Width: 50 nSec high / 50 nSec low min. |
| DIO | No. of Inputs: 8 TTL- and switch-compatible. Inputs pulled up to +5 VDC by 1 Kilohm resistor. Logic Low: 0 to 0.4 VDC. Logic High: 2.4 to 24 VDC. No. of Outputs: 8, TTL/DTL compatible. Outputs are tri-stated at power on and at reset. Zener diode protected at 5.6 VDC. Logic Low: 0 to 0.4 VDC at 24 mA sink current Logic High: 2.5 to 5.0 VDC at 10 mA source current. |
| Environment | Operating Temperature Range: 0° to 60°C. Storage Temperature Range: -40° to +100°C. Humidity: 5% to 90% RH, non-condensing. |
| Gross Weight | 13.1 inches (333mm), plugs into a "long slot" in PC |
| IR Interface | Level: Jumper selectable, levels 2-7. Enable/Disable: Interrupt generated by completion of A/D conversion. Interrupt cancelled when A/D data are read or when there is a computer write to base address plus 1 (reset interrupt request). |
| Power Consumption | +5 VDC at 0.5 A. +12 VDC at 20 mA. -12 VDC at 20 mA. |
Any product names, logos, brands, and other trademarks or media featured or referred to on Elite.Parts are the property of their respective owners.
GID Industrial is not an authorized distributor, reseller, or representative for the products featured on this site, and is not affiliated with, sponsored by, or endorsed by any of the manufacturers or holders of the rights to the aforementioned products.
All information on this site is displayed strictly for identification purposes and does not indicate a relationship with or an approval from any third parties.
