Part Number | 104-COM-2S |
---|---|
Manufacturer | ACCES I/O PRODUCTS |
Category | SERIAL COMMUNICATION » PC/104 BUS |
Price | Request Quote |
Lead Time | Request Quote |
ACCES I/O 104-COM-2S 2x RS-422, 2x RS-485 Serial Ports
Once you accept your quote and confirm your order, we prepare by retrieving related parts and components from our inventory. Anything we do not currently have in stock is sourced.
Upon receipt, all parts are visually inspected for damage and then photographed to document their condition. Parts acquired from vendors must meet our quality standards.
Industrial computer boards and other parts we are equipped to evaluate are tested to verify functionality and discover possible damage.
Industrial computer boards have all components with low MTBF numbers (such as capacitors and connectors) replaced and are washed in our PCB cleaner to remove dust and grime.
Industrial computer boards are fully diagnosed and repaired by our engineers. Logs of the problems encountered and solutions implemented are recorded.
Industrial computer boards have all I/O connections rigorously tested to ensure that everything is working properly before the board is certified as ready to ship.
After photos are taken to document the exterior condition of the part, it is packaged and sent to the customer. ESD-safe materials are used to protect sensitive equipment on its journey.
Elite.Parts is a website of GID Industrial, an ISO 9001:2015-certified company that has specialized in servicing industrial computer boards and providing other industrial products for sectors including manufacturing, defense, aerospace, entertainment, healthcare, and more by utilizing our combined skills and vast international network of trusted suppliers since our founding in 2015.
Do you need a 104-COM-2S? We can help you find it at a competitive price!
Compactflash | I/O Connections: Via two 40 pin IDC type right angle connectors. There are eight pins per port plus common grounds. Character Length: 5,6,7, or 8 bits Parity: Even, odd, or none Stop Interval: 1, 1.5, or 2 bits Serial Data Rates: Up to 115.2K baud, asynchronous. A faster range of rates, up to 921.6K, is achieved by jumper selection. Multidrop: Compatible with RS-485 specifications. Up to 32 drivers and receivers allowed on line. Driver/Receivers used are type 75ALS180. Compatible with RS-422 specifications. Up to ten receivers allowed on line. Address: ISA BUS address is set by jumpers on the board. A “Default” jumper determines whether the channel addresses are sequential or loaded from non-volatile memory on the board. Interrupts: Individual IRQs for each channel are stored onboard in non-volatile memory. Receiver Input Sensitivity: ±200 mV differential input Common Mode Voltage Range: +12V to -7V Transmitter Output Drive Capability: 60 mA with thermal shutdown. J |
---|---|
Environment | Operating Temperature Range: 0 to +70°C, (-40 to +85°C Optional) Storage Temperature Range: -50 to +120°C Humidity: 5% to 95% RH, non-condensing Power Required: +5 VDC at 80 mA typical, all outputs open |
Any product names, logos, brands, and other trademarks or media featured or referred to on Elite.Parts are the property of their respective owners.
GID Industrial is not an authorized distributor, reseller, or representative for the products featured on this site, and is not affiliated with, sponsored by, or endorsed by any of the manufacturers or holders of the rights to the aforementioned products.
All information on this site is displayed strictly for identification purposes and does not indicate a relationship with or an approval from any third parties.