HORIZON104 PC/104 rugged I/O 1U rack chassis Horizontal PC/104 embedded industrial computer Kontron is proud to introduce a new concept the HORIZON104 is the only 1U rack chassis True industrial 1U rack chassis in industrial embedded rack chassis with its capable of five separate COTS industrial I/O 1U x 19-inch shallow depth HORIZON104. The HORIZON104 combines boards. Now full data acquisition, Five I/O COTS board capable the popular 1U rack chassis industrial monitoring, control and communications Low power design computer with the popular embedded boards can be put in a single shallow 1U rack advantages of PC/104. Most 1U rack mount, saving valuable rack space. 0 ° to 60 °C standard operating temperature chassis are primarily a soft commodity that cater to the server market and few can Internal 2.5-inch drive bay, front PC/104 boards are small form factor COTS mount 5.25-inch tolerate more than a very ideal air (commercial off the shelf) PC-based cards conditioned environment. They also that incorporate both the ISA and PCI bus Front or rear I/O capable support few I/O boards. By combining with stacking connectors instead of a PCB Dual front filtered fan cooling Kontron's experience in both the PC/104 bus. Because of this PC/104 boards tend to Flexible I/O interfacing and the industrial rack mount industry, the use CMOS components for lower power and HORIZON104 is designed for higher shock wider temperature operation. They also and vibration, higher temperature tend to be designed with less space waste extremes and very low power required by than most standard PC boards. The applications in aircraft, vehicle, shipboard stacking design utilizes four corners as well as remote powered or harsher mounting to be secure in a vertical stack. industrial environments. Utilizing the HORIZON104 moves PC/104 in a horizontal concept of a horizontal PC/104 backplane, plane by creating a horizontal backplane with one CPU plug-in location, two locations to be mounted. For solid state drive for PCI or ISA and three locations for ISA solutions the drive bay, PC/104 board slot, only. Each board is hard mounted to either or USB can be used. PC/104 I/O exits the the chassis or backplane with four screws chassis from pre-made I/O panels internally at its corners, which make it stronger reached from board cables. Six rear I/O against shock and vibration than the panels and two front I/O panels allow traditional PC/104 stack or PCI/ISA PC flexible front and rear I/O solutions for both boards held in place, by a single rear CPU I/O such as video, keyboard, mouse, bracket screw. The PC/104 connectors USB, Ethernet, reset, speaker, serial and have far more secure connections than parallel connections. PC/104 I/O can be traditional PC boards. By putting the low DB9, DB25, DB37, or ribbon cables as well power boards in a horizontal plane, they as custom connectors. The user can then can also be better cooled than the mount specific connectors where he wants cramped stacked units or traditional 1U them for his application as opposed to PCI/ISA systems. The HORIZON104 has two where the board slot is. front mounted cooling fans drawn through an industrial re-usable filter with over The HORIZON104 comes with 1U ATX type 20CFM of cooling for this small 1U chassis 100W 110/220 AC power supply with in addition to the power supply fan. standard system operation temperature of Because the PC/104 boards use so much 0 ° to 60 °C which is better than almost all less power, a full system barely uses half of 1U rack chassis on the market. The chassis the 100W power supply in the HORIZON104. was designed for optional extended This allows the HORIZON104 to have a temperature operation as well as various tougher board and chassis design than any DC power options by special order. other rack mount 1U chassis on the market. Basically the HORIZON104 is for the customer who wants the highest tempera- The HORIZON104 has one front mounted ture range, highest shock and vibration, drive mount if required for CDROM, CD-ROM/ lowest power use, and the most COTS I/O floppy combo, or removable drive bay. An slots in an economical 1U 19-inch rack internal 2.5-inch drive bay provides either mount chassis on the market. laptop or auto industry rugged hard drives HORIZON104 - Technical Specifications Dimensions (W x H x D) • 17(19 at ears) x 1.75 x 19-inch (432 x 45 x 483mm) Ordering Guide Disk Drive Capacity HORIZON104 • One 2.5-inch drive bay internal • 1U chassis with PC/104 backplane, 100W AC supply • One 5.25-inch front mount drive bay Cooling Fans I/O Panel Options • Two 13CFM DC fans in front, 1U integrated power supply fan IOPANEL-CPUIO Front Panel • Rear panel, cabling, PCB with connectors to support MOPS PC/104 CPU I/O • Power on LED, optional reset, keyboard, mouse, video, USB I/O for video, PS/2 keyboard/mouse, USB, reset, speaker Rear Panel IOPANEL-CPUIO-F • Power on/off switch, six I/O plates, power input connection • Front panel, cabling, PCB with connectors to support MOPS PC/104 CPU I/O Construction for video, PS/2 keyboard/mouse, USB, reset, speaker • 12 gauge front panel, 18 gauge CRS cold rolled steel gold zinc plated IOPANEL-2E1USB Color • Rear panel, cabling, PCB with connectors to support MOPS PC/104 CPU I/O • Front panel cardinal paint, medium texture, water based Black #8102-08 for two RJ45 10/100 Ethernet, second USB Backplane IOPANEL-2DB9 • One PC/104, PC/104-Plus CPU board slot • Panel with two DB9 cut-outs for serial • Two either PC/104, PC/104-Plus, PCI-104 I/O slots IOPANEL-DB25 • Three PC/104 only I/O slots (one CPU and five I/O slots total) • Panel with single DB25 cut-out for serial or LPT connector IOPANEL-DB37 Power Supply • Panel with single DB37 cut-out for I/O connector • 100W @ 115/230AC, 50/60Hz, switch auto sensing (0 ° to 60 °C) IOPANEL-RB • 180W @ 115/230AC, 50/60Hz, switch auto sensing (0 ° to 40 °C) • Panel with general purpose ribbon cable (up to 50-pin) access with strain relief Environmental Accessories Operating Temperature 7504-RMK18 • 0 ° to 60 °C (32 ° to 140 °F) call on extended temperature • 18-inch rack slide kit Non-Operating Temperature • -40 ° to 70 °C (-40 ° to 158 °F) Humidity • 5 to 95% RHNC Operating Altitude • 10,000-feet (3048-meters) Non-Operating Altitude • 50,000-feet (15,240-meters) Shock • 30g acceleration peak (11ms pulse), higher specification by special order with different power source Vibration • 5 to 7Hz 0.5-inch double amplitude displacement; 7 to 2000Hz 2g acceleration • Higher specification by special order with different power source Agency Approvals • FCC Class A • CE , UL The latest version of this document may be found on our web site. Specifications subject to change without notice. Some products may not be available in all regions. Kontron and the Kontron logo are registered trademarks of Kontron Embedded Computers. All other trademarks are the property of their respective owners. Copyright 2004 by Kontron Embedded Computers. All rights reserved. 2095 - HORIZON104.1_06/2004