MC Series Drives MC Series Features and Benefi ts Worldwide Coverage We’re everywhere you are The M1000 industrial drives The M3000 industrial drives The intelligent, versatile and cost-effective choice for industrial The choice when your process control demands fast applications. acceleration and response. Growth requires drive. Competitive, committed and From harsh environments to high torque loads, the M1000 Designed expressly for use where the motor control is an consistent drive. At Lenze-AC Tech we concentrate 110% Series microdrives meet the toughest requirements with integral part of a process, the M3000 is rated of our energies on providing our Customers outstanding reliability, at a low cost. The easy-to-program for constant torque applications but can easily be confi gured with everything “from the load up”. M1000 offers full features, extensive I/O, and a full array of for variable torque applications. Flexible, simple, rugged, robust! programmable functions. The M1000 is available in a power Most “process control” drives are designed for variable range of 1/4 to 150 HP (0.18 - 110 kW) and voltages ranging torque applications where the motor is driving a centrifugal from 115 to 575 VAC. fan or pump. As such, these drives are limited to 110% “Customer Service has always been and With its Enhanced Torque System (ETS), a highly effi cient sine current for overload situations such as acceleration or coding algorithm and “auto-voltage boost,” the M1000 delivers responding to a feedback change. will always be our number one commitment. maximum starting and accelerating torque and tight speed The MC3000 is a true Constant Torque drive rated for 180% Our success depends on it.” regulation, even under fl uctuating load conditions. A built-in, of rated current for 30 seconds and 150% for one minute; UL-approved thermal overload provides full motor protection. this allows faster response to system changes and the ability to apply the MC3000 to non-centrifugal applications such as M1000 drive features compressors, conveyors and other “constant torque” loads. „ Manual boost for high starting torque Driving design technology forward means we never stop The M3000 is available in the same power ranges and „ Auto-boost for high torque acceleration at any speed thinking about process improvements. Did we deliver a qual- voltages as the M1000. „ Adjustable units display: Hz, RPM, %, /SEC, /MIN, /HR ity product to market that meets the Customer’s needs? That M3000 drive features „ Slip compensation for tight speed regulation even under is the key. „ Speed synchronized automatic restart after fault fluctuating loads „ Loss of follower signal action: fault or go to preset speed „ Control configuration: local, remote, both, serial communications „ Control configuration: local, remote, serial communications, keypad, terminal strip, PID mode „ Auxiliary outputs - two open collector outputs and a Form Innovation takes art and skill to combine what’s C relay. Functions include: Run, Fault, Inverse Fault, Fault „ Adjustable units display: PSI, CFM, GPM, FPM, IN, FT, new and what’s proven to produce a product with Lockout, At Commanded Speed, Above a Preset Speed, Hz, RPM, %, /SEC, /MIN, /HR exceptional form, fi t and function. Current Limit, Auto/ Manual Mode Indication, „ Auxiliary outputs - two open collector outputs and a Form PID High/Low Alarms C relay: Functions include Loss of Speed Reference ® „ Modbus Serial Communication Protocol Signal in addition to those listed for the M1000. „ Sleep mode with adjustable speed threshold and time. M1000 and M3000 options ® „ Metasys Serial Communication Protocol (optional) Expand the capabilities of your MC drive with the following options. All options can be factory installed or fi eld installed. „ Modbus Serial Communication Protocol (standard) „ Dynamic Braking: for faster stopping or deceleration Industrial Drives and Controls... That’s All We Do! „ Additional Form-C relay „ Remote Keypad „ PID: direct or reverse acting with adjustable Proportional, Integral, and Derivative gains, signal calibration, high and low level alarms. Display that makes sense The MC Series keypad display has been designed to make it easy to understand what is happening with the AC motor that is driving your machine or process. Motor frequency (Hz) may not make as much sense to your operator as motor speed (rpm) or conveyor speed (fpm) or fl ow rate A Global Drives Company (gpm). Displays can be confi gured to show what you need to see, in the units that you need to see them in. Because www.lenze-actech.com our displays are in English, programming the MC is easy to understand, often eliminating the need to have the manual 1-800-217-9100 in one hand while programming with the other! 1-508-278-9100 +44 (0) 1743 464309 CB-MC-0209 For Sales and Support, Contact Walker EMD • Toll-free: (800) 876-4444 • Tel: (203) 426-7700 • Fax: (203) 426-7800 • www.walkeremd.com MC Series Our promise MC Series Specifications, Enclosures & Tools MC Series Ratings & Dimensions Specifications System Protection HP Voltage Input 3 Phase NEMA 1 H x W x D H x W x D NEMA 4 & NEMA 4X H x W x D H x W x D Commitment to Value Phase Output Model (inches) (mm) 12 Model Model (inches) (mm) „ Input line voltage calibration: automatically or manually optimizes Output wave form High carrier frequency, sine coded,pulse width Amps (See Note 1) (See Notes) over and under voltage trip levels The finest product at the best price is serious business. It takes continuous life cycle management to modulated (PWM) 2 0.25 240/120 1Ø 1.4 M(*)103SB 7.50 x 4.70 x 3.33 190 x 119 x 85 M1103SC M1103SE 7.88 x 6.12 x 3.63 200 x 155 x 92 achieve this goal. We are always investigating techniques to improve efficiency and take advantage of the „ Thermal overload: Inverse I t motor thermal protection (0.18kW) Input voltage ratings 240/120,240/200, 480/400,590/480 VAC latest microprocessor and power module technology. When we achieve efficiency gains or material cost „ Two critical frequency avoidance ranges: with adjustable bandwith 240/120 1Ø 2.2 M(*)105SB 7.50 x 6.12 x 3.63 190 x 155 x 92 M1105SC M1105SE 7.88 x 7.86 x 3.75 200 x 200 x 95 reductions, we pass those savings on to our customers. This simple philosophy has permitted us to build 0.5 Input voltage tolerance +10%,-15% of rating „ Programmable automatic restarting after fault for unattended 240 1Ø 2.2 M(*)205SB 7.50 x 4.70 x 3.63 190 x 119 x 92 M1205SC M1205SE 7.88 x 6.12 x 4.35 200 x 155 x 110 (0.37kW) and maintain a very loyal base of customers. applications 240/200 3Ø 2.2/2.5 M(*)205B 7.50 x 4.70 x 3.63 190 x 119 x 92 M1205C M1205E 7.88 x 6.12 x 4.35 200 x 155 x 110 Input frequency tolerance 48 to 62 Hz „ Speed reference selection: keypad or analog input 1 240/120 1Ø 4.0 M(*)110SB 7.50 x 6.12 x 4.22 190 x 155 x 107 M1110SC M1110SE 7.88 x 7.86 x 4.90 200 x 200 x 124 Output frequency 0-650 Hz (optional to 1000 Hz on M1000) Commitment to Quality „ Password protection: enable/disable and setting (0000-9999) 240 1Ø 4.0 M(*)210SB 7.50 x 4.70 x 4.33 190 x 119 x 110 M1210SC M1210SE 7.88 x 6.12 x 4.35 200 x 155 x 110 (0.75kW) 240/200 3Ø 4.0/4.6 M(*)210B 7.50 x 4.70 x 4.33 190 x 119 x 110 M1210C M1210E 7.88 x 6.12 x 4.35 200 x 155 x 110 Carrier frequency 2.5 kHz to 14 kHz (Drive rated at 8 kHz) „ Monitor mode: enable/disable allows view-only of password From product design to manufacture, service and training, quality is at the foundation of Lenze-AC Tech’s 480/400 3Ø 2.0/2.3 M(*)410B 7.50 x 4.70 x 3.63 190 x 119 x 92 M1410C M1410E 7.88 x 6.12 x 4.35 200 x 155 x 110 protected parameter settings corporate philosophy. A quality product is built of superior materials by highly skilled personnel equipped 590 3Ø 1.6 M(*)510B 7.50 x 4.70 x 3.63 190 x 119 x 92 M1510C M1510E 7.88 x 6.12 x 4.35 200 x 155 x 110 Frequency stability +0.00006% / °C with state-of-the art instruments. And a quality product is backed by expert training, knowledgeable sales „ Parameter reset: reset to factory defaults (choice of 50 Hz or 60 Hz 1.5 240/120 1Ø 5.2 M(*)115SB 7.50 x 6.12 x 4.22 190 x 155 x 107 M1115SC M1115SE 7.88 x 7.86 x 4.90 200 x 200 x 124 Overload current capacity 180% for 30 seconds, 150% for one minute (at 8 kHz) factory settings) representatives and experienced repair personnel. Continuous life cycle improvement fueled by our pledge 240 1Ø 5.2 M(*)215SB 7.50 x 6.12 x 4.22 190 x 155 x 107 M1215SC M1215SE 7.88 x 7.86 x 4.90 200 x 200 x 124 (1.1kW) 240/200 3Ø 5.2/6.0 M(*)215B 7.50 x 4.70 x 4.33 190 x 119 x 110 M1215C M1215E 7.88 x 6.12 x 5.25 200 x 155 x 133 to our Customers drives our technology forward. We feel so strongly about quality that each MC Drive is Service factor 1.0 „ Fault history: View log of eight previous trips with drive status at time of trip backed with a two-year warranty. 240 1Ø 6.8 M(*)220SB 7.50 x 6.12 x 5.12 190 x 155 x 130 M1220SC M1220SE 7.88 x 7.86 x 4.90 200 x 200 x 124 2 Power factor Near unity 240/200 3Ø 6.8/7.8 M(*)220B 7.50 x 6.12 x 5.12 190 x 155 x 130 M1220C M1220E 7.88 x 7.86 x 4.90 200 x 200 x 124 „ Fault history reset (1.5kW) 480/400 3Ø 3.4/3.9 M(*)420B 7.50 x 6.12 x 4.22 190 x 155 x 107 M1420C M1420E 7.88 x 7.86 x 4.90 200 x 200 x 124 Efficiency Up to 98.5% Commitment to Innovation 590 3Ø 2.7 M(*)520B 7.50 x 6.12 x 4.22 190 x 155 x 107 M1520C M1520E 7.88 x 7.86 x 4.90 200 x 200 x 124 World Class Control Speed reference follower 0-10 VDC or 4-20 mA „ Four preset speeds 3 240 1Ø 9.6 M(*)230SB 7.50 x 6.12 x 5.12 190 x 155 x 130 M1230SC M1230SC 7.88 x 7.86 x 5.90 200 x 200 x 150 We pride ourselves on delivering products to the market that are designed to meet specific customer 240/200 3Ø 9.6/11.0 M(*)230B 7.50 x 6.12 x 5.12 190 x 155 x 130 M1230C M1230C 7.88 x 7.86 x 5.90 200 x 200 x 150 (2.2kW) Control voltage 15 VDC needs. Our portfolio of innovative products is broad and covers very simple variable speed applications up „ Independent Accel and Decel 240/400 3Ø 4.8/5.5 M(*)430B 7.50 x 6.12 x 5.12 190 x 155 x 130 M1430C M1430C 7.88 x 7.86 x 4.90 200 x 200 x 124 through complex motion control. Each product, including the SMVector, is positioned so our customers pay „ DC injection braking timed or continuous on starting or stopping with 590 3Ø 3.9 M(*)530B 7.50 x 6.12 x 5.12 190 x 155 x 130 M1530C M1530C 7.88 x 7.86 x 4.90 200 x 200 x 124 Analog outputs 0-10 VDC,or 2-10 VDC (4-20 mA with 500 ohm only for the level of technology necessary for their application. programmable maximum load level impedance).Proportional to speed and load 5 240/200 3Ø 15.2/17.5 M(*)250B 7.88 x 7.86 x 5.94 200 x 200 x 151 M1250C M1250E 9.75 x 10.26 x 7.20 248 x 261 x 183 „ Dynamic brake enable/disable (dynamic braking requires option card) 480/400 3Ø 7.6/8.7 M(*)450B 7.50 x 6.12 x 5.12 190 x 155 x 130 M1450C M1450E 7.88 x 7.86 x 5.90 200 x 200 x 150 (3.7kW) Digital outputs Form C relay:2A at 28 VDC or 120 VAC 590 3Ø 6.1 M(*)551B 7.88 x 7.86 x 5.94 200 x 200 x 151 M1550C M1550E 7.88 x 7.86 x 5.90 200 x 200 x 150 Commitment to Simplicity „ Base frequency adjustment to calibrate V/Hz to motor requirements Two open-collector outputs: 40mA at 30 VDC with constant or variable torque curves 240/200 3Ø 22/25 M(*)275B 9.38 x 7.86 x 6.84 238 x 200 x 174 M1275C M1275E 11.75 x 10.26 x 8.35 298 x 261 x 212 7.5 One of the cornerstones of our design philosophy is to make our products simple to use. Technology only 480/400 3Ø 11.0/12.6 M(*)475B 9.38 x 7.86 x 6.25 238 x 200 x 159 M1475C M1475E 9.75 x 10.26 x 7.20 248 x 261 x 183 Serial communications RS485 networkable, Modbus (standard) and (5.5kW) „ Coast or ramp stopping benefits the user if it can be easily understood and applied. The SMVector’s intuitive display and EPM 590 3Ø 9.0 M(*)575B 9.38 x 7.86 x 6.25 238 x 200 x 159 M1575C M1575E 9.75 x 10.26 x 7.20 248 x 261 x 183 Metasys (optional with the M3000) „ Auto and Manual mode enable/disable technology dramatically simplifies installation, commissioning and operation for our customers. 10 240/200 3Ø 28/32 M(*)2100B 11.25 x 7.86 x 6.84 286 x 200 x 174 M12100C M12100E 13.75 x 10.26 x 8.35 349 x 261 x 212 Storage temperature -20° to 70° C „ Units display calibration and decimal point adjustment 480/400 3Ø 14.0/16.0 M(*)4100B 9.38 x 7.86 x 6.84 238 x 200 x 174 M14100C M14100E 11.75 x 10.26 x 8.35 298 x 261 x 212 (7.5kW) 590 3Ø 11.0 M(*)5100B 9.38 x 7.86 x 7.40 238 x 200 x 188 M15100C M15100E 11.75 x 10.26 x 8.35 298 x 261 x 212 Chassis -10°– 55°C „ Load meter calibration Commitment to Performance Type 1 (IP31) -10°– 50°C 15 240/200 3Ø 42/48 M(*)2150B 12.75 x 7.86 x 6.84 324 x 200 x 174 M12150C M12150E 15.75 x 10.26 x 8.35 400 x 261 x 212 „ Adjustable contrast setting for easy viewing of display from any The SMVector is in a class by itself when it comes to performance. At the heart of the SMV are sophisticated 480/400 3Ø 21/24 M(*)4150B 11.25 x 7.86 x 6.84 286 x 200 x 174 M14150C M14150E 13.75 x 10.26 x 8.35 349 x 261 x 212 Type 4 (IP65) -10°– 40°C (11kW) angle 590 3Ø 17.0 M(*)5150B 12.75 x 7.86 x 6.84 324 x 200 x 174 M15150C M15150E 13.75 x 10.26 x 8.35 349 x 261 x 212 vector algorithms that achieve new heights in torque production and speed control. This technology Type 12 (IP54) -10°– 40°C „ Load reference calibration breakthrough allows our customers to cover a full range of applications from simple speed control through 240/200 3Ø 54/62 M(*)2200B 12.75 x 10.26 x 7.74 324 x 261 x 197 M12200D ------------ 15.75 x 10.26 x 8.35 400 x 261 x 212 20 Ambient humidity Less than 95%, (non-condensing) „ Load indicating output signal selection: 0-10 VDC or 4-20 mA advanced torque and process control with the same product. 480/400 3Ø 27/31 M(*)4200B 12.75 x 7.86 x 6.84 324 x 200 x 174 M14200C M14200E 15.75 x 10.26 x 8.35 400 x 261 x 212 (15kW) 590 3Ø 22 M(*)5200B 12.75 x 7.86 x 7.40 324 x 200 x 188 M15200C M15200E 15.75 x 10.26 x 8.35 400 x 261 x 212 „ Load/speed indicating output signal calibration Maximum altitude 3300 Feet (1000 meters) w/o derating „ Four programmable terminals for speed reference and control 25 240/200 3Ø 68/78 M(*)2250B 15.75 x 10.26 x 8.35 400 x 261 x 212 M12250D ------------ 20.25 x 10.26 x 8.35 514 x 261 x 212 Our Promise Standards UL, cUL, CE(LVD) 480/400 3Ø 34/39 M(*)4250B 12.75 x 10.26 x 7.74 324 x 261 x 197 M14250D ------------ 15.75 x 10.26 x 8.35 400 x 261 x 212 (18.5kW) activation 590 3Ø 27 M(*)5250B 12.75 x 10.26 x 7.74 324 x 261 x 197 M15250D ------------ 15.75 x 10.26 x 8.35 400 x 261 x 212 At Lenze - AC Tech it is not good enough to deliver part of a promise. Our products deliver the entire package; Warranty 2 Years „ Programmable terminal for external trip activation or manual reset Price Leadership, Quality, Innovation, Simplicity and Performance. 30 240/200 3Ø 80/92 M(*)2300B 15.75 x 10.26 x 8.35 400 x 261 x 212 M12300D ------------ 20.25 x 10.26 x 8.35 514 x 261 x 212 480/400 3Ø 40/46 M(*)4300B 12.75 x 10.26 x 7.74 324 x 261 x 197 M14300D ------------ 15.75 x 10.26 x 8.35 400 x 261 x 212 (22kW) Available Enclosures 590 3Ø 32 M(*)5300B 12.75 x 10.26 x 8.25 324 x 261 x 210 M15300D ------------ 15.75 x 10.26 x 8.35 400 x 261 x 212 240/200 3Ø 120/104 M(*)2400B 25.00 x 13.00 x 10.50 635 x 330 x 212 ------------ ------------ 40 480/400 3Ø 52/60 M(*)4400B 15.75 x 10.26 x 8.35 400 x 261 x 212 M14400D ------------ 20.25 x 10.26 x 8.35 514 x 261 x 212 (30kW) 590 3Ø 41 M(*)5400B 15.75 x 10.26 x 8.35 400 x 261 x 212 M15400D ------------ 20.25 x 10.26 x 8.35 50 480/400 3Ø 65/75 M(*)4500B 19.75 x 10.26 x 8.55 502 x 261 x 217 M14500D ------------ 21.00 x 13.72 x 8.35 533 x 348 x 212 590 3Ø 52 M(*)5500B 19.75 x 10.26 x 8.55 502 x 261 x 217 M15500D ------------ 21.00 x 13.72 x 8.35 533 x 348 x 212 (37.5kW) 60 240/200 3Ø 177/154 M(*)2600B 47.00 x 16.64 x 11.85 1194 x 423 x 301 ------------ ------------ 480/400 3Ø 77/88 M(*)4600B 19.75 x 10.26 x 8.55 502 x 261 x 217 M14600D ------------ 21.00 x 13.72 x 8.35 533 x 348 x 212 (45kW) 590 3Ø 62 M(*)5600B 19.75 x 10.26 x 8.55 502 x 261 x 217 M15600D ------------ 21.00 x 13.72 x 8.35 533 x 348 x 212 480/400 3Ø 110/96 M(*)4750B 29.00 x 16.64 x 11.85 737 x 423 x 301 M14750D ------------ 37.00 x 18.00 x 13.30 940 x 457 x 338 75 (55kW) NEMA Type 1 NEMA Type 12 NEMA Type 4 NEMA Type 4X 480/400 3Ø 143/124 M(*)41000B 29.00 x 24.42 x 11.85 737 x 620 x 301 M141000D ------------ 39.00 x 26.00 x 13.30 991 x 660 x 338 A true general purpose Intended for environments that contain For “wash‑down” duty, the Identical to Type 4 (water‑tight) 100 (75kW) enclosure, the most commonly dust, oil or other airborne contaminants. enclosure is gasketed to protect but must also protect from caustic used in industry. The Type The Type 12 enclosure is gasketed the electronics from water agents. AC Tech manufactures 480/400 3Ø 179/156 M(*)41250B 29.00 x 24.42 x 11.85 737 x 620 x 301 M141250D ------------ 39.00 x 26.00 x 13.30 991 x 660 x 338 125 1 enclosure allows for a to protect the electronics. AC Tech sprayed directly on and around these drives using stainless‑steel (90kW) free exchange of air to keep recommends the Type 4 enclosure for the drive, typically to keep enclosures and anodized heat sinks 480/400 3Ø 207/180 M(*)41500B 29.00 x 36.66 x 11.85 737 x 931 x 301 ------------ ------------ 150 the electronics cool while this duty in the smaller power sizes as the equipment clean. And no which provide superior heat transfer (110kW) keeping the enclosure size we can provide the higher degree of cooling fans are needed. and greater structural integrity. to a minimum. Installation protection at the same price. Type 12 must be in a relatively clean is available in the higher sizes where NEMA 1 environment. Type 4 would be cost prohibitive. Note 1: “M(*)” signifies either M1 for the M1000 series or M3 for M3000 series. NEMA 4 and NEMA12 Note 2: Replace the “M1” at the beginning of the model number with “M3” to specify a M3000 series drive. Note 3: Model numbers ending with “C” are suitable for NEMA 4 and NEMA 12 applications. AC Variable Frequency Drives | Servo Drives & Motors | Gear Reducers | Integral Gear Motors | Clutches & Brakes | Machine Automation Note 4: Model numbers ending with “D” are suitable for NEMA 12 applications. (Blue guide line is trim line) For Sales and Support, Contact Walker EMD • Toll-free: (800) 876-4444 • Tel: (203) 426-7700 • Fax: (203) 426-7800 • www.walkeremd.com MC Series Our promise MC Series Specifications, Enclosures & Tools MC Series Ratings & Dimensions Specifications System Protection HP Voltage Input 3 Phase NEMA 1 H x W x D H x W x D NEMA 4 & NEMA 4X H x W x D H x W x D Commitment to Value Phase Output Model (inches) (mm) 12 Model Model (inches) (mm) „ Input line voltage calibration: automatically or manually optimizes Output wave form High carrier frequency, sine coded,pulse width Amps (See Note 1) (See Notes) over and under voltage trip levels The finest product at the best price is serious business. It takes continuous life cycle management to modulated (PWM) 2 0.25 240/120 1Ø 1.4 M(*)103SB 7.50 x 4.70 x 3.33 190 x 119 x 85 M1103SC M1103SE 7.88 x 6.12 x 3.63 200 x 155 x 92 achieve this goal. We are always investigating techniques to improve efficiency and take advantage of the „ Thermal overload: Inverse I t motor thermal protection (0.18kW) Input voltage ratings 240/120,240/200, 480/400,590/480 VAC latest microprocessor and power module technology. When we achieve efficiency gains or material cost „ Two critical frequency avoidance ranges: with adjustable bandwith 240/120 1Ø 2.2 M(*)105SB 7.50 x 6.12 x 3.63 190 x 155 x 92 M1105SC M1105SE 7.88 x 7.86 x 3.75 200 x 200 x 95 reductions, we pass those savings on to our customers. This simple philosophy has permitted us to build 0.5 Input voltage tolerance +10%,-15% of rating „ Programmable automatic restarting after fault for unattended 240 1Ø 2.2 M(*)205SB 7.50 x 4.70 x 3.63 190 x 119 x 92 M1205SC M1205SE 7.88 x 6.12 x 4.35 200 x 155 x 110 (0.37kW) and maintain a very loyal base of customers. applications 240/200 3Ø 2.2/2.5 M(*)205B 7.50 x 4.70 x 3.63 190 x 119 x 92 M1205C M1205E 7.88 x 6.12 x 4.35 200 x 155 x 110 Input frequency tolerance 48 to 62 Hz „ Speed reference selection: keypad or analog input 1 240/120 1Ø 4.0 M(*)110SB 7.50 x 6.12 x 4.22 190 x 155 x 107 M1110SC M1110SE 7.88 x 7.86 x 4.90 200 x 200 x 124 Output frequency 0-650 Hz (optional to 1000 Hz on M1000) Commitment to Quality „ Password protection: enable/disable and setting (0000-9999) 240 1Ø 4.0 M(*)210SB 7.50 x 4.70 x 4.33 190 x 119 x 110 M1210SC M1210SE 7.88 x 6.12 x 4.35 200 x 155 x 110 (0.75kW) 240/200 3Ø 4.0/4.6 M(*)210B 7.50 x 4.70 x 4.33 190 x 119 x 110 M1210C M1210E 7.88 x 6.12 x 4.35 200 x 155 x 110 Carrier frequency 2.5 kHz to 14 kHz (Drive rated at 8 kHz) „ Monitor mode: enable/disable allows view-only of password From product design to manufacture, service and training, quality is at the foundation of Lenze-AC Tech’s 480/400 3Ø 2.0/2.3 M(*)410B 7.50 x 4.70 x 3.63 190 x 119 x 92 M1410C M1410E 7.88 x 6.12 x 4.35 200 x 155 x 110 protected parameter settings corporate philosophy. A quality product is built of superior materials by highly skilled personnel equipped 590 3Ø 1.6 M(*)510B 7.50 x 4.70 x 3.63 190 x 119 x 92 M1510C M1510E 7.88 x 6.12 x 4.35 200 x 155 x 110 Frequency stability +0.00006% / °C with state-of-the art instruments. And a quality product is backed by expert training, knowledgeable sales „ Parameter reset: reset to factory defaults (choice of 50 Hz or 60 Hz 1.5 240/120 1Ø 5.2 M(*)115SB 7.50 x 6.12 x 4.22 190 x 155 x 107 M1115SC M1115SE 7.88 x 7.86 x 4.90 200 x 200 x 124 Overload current capacity 180% for 30 seconds, 150% for one minute (at 8 kHz) factory settings) representatives and experienced repair personnel. Continuous life cycle improvement fueled by our pledge 240 1Ø 5.2 M(*)215SB 7.50 x 6.12 x 4.22 190 x 155 x 107 M1215SC M1215SE 7.88 x 7.86 x 4.90 200 x 200 x 124 (1.1kW) 240/200 3Ø 5.2/6.0 M(*)215B 7.50 x 4.70 x 4.33 190 x 119 x 110 M1215C M1215E 7.88 x 6.12 x 5.25 200 x 155 x 133 to our Customers drives our technology forward. We feel so strongly about quality that each MC Drive is Service factor 1.0 „ Fault history: View log of eight previous trips with drive status at time of trip backed with a two-year warranty. 240 1Ø 6.8 M(*)220SB 7.50 x 6.12 x 5.12 190 x 155 x 130 M1220SC M1220SE 7.88 x 7.86 x 4.90 200 x 200 x 124 2 Power factor Near unity 240/200 3Ø 6.8/7.8 M(*)220B 7.50 x 6.12 x 5.12 190 x 155 x 130 M1220C M1220E 7.88 x 7.86 x 4.90 200 x 200 x 124 „ Fault history reset (1.5kW) 480/400 3Ø 3.4/3.9 M(*)420B 7.50 x 6.12 x 4.22 190 x 155 x 107 M1420C M1420E 7.88 x 7.86 x 4.90 200 x 200 x 124 Efficiency Up to 98.5% Commitment to Innovation 590 3Ø 2.7 M(*)520B 7.50 x 6.12 x 4.22 190 x 155 x 107 M1520C M1520E 7.88 x 7.86 x 4.90 200 x 200 x 124 World Class Control Speed reference follower 0-10 VDC or 4-20 mA „ Four preset speeds 3 240 1Ø 9.6 M(*)230SB 7.50 x 6.12 x 5.12 190 x 155 x 130 M1230SC M1230SC 7.88 x 7.86 x 5.90 200 x 200 x 150 We pride ourselves on delivering products to the market that are designed to meet specific customer 240/200 3Ø 9.6/11.0 M(*)230B 7.50 x 6.12 x 5.12 190 x 155 x 130 M1230C M1230C 7.88 x 7.86 x 5.90 200 x 200 x 150 (2.2kW) Control voltage 15 VDC needs. Our portfolio of innovative products is broad and covers very simple variable speed applications up „ Independent Accel and Decel 240/400 3Ø 4.8/5.5 M(*)430B 7.50 x 6.12 x 5.12 190 x 155 x 130 M1430C M1430C 7.88 x 7.86 x 4.90 200 x 200 x 124 through complex motion control. Each product, including the SMVector, is positioned so our customers pay „ DC injection braking timed or continuous on starting or stopping with 590 3Ø 3.9 M(*)530B 7.50 x 6.12 x 5.12 190 x 155 x 130 M1530C M1530C 7.88 x 7.86 x 4.90 200 x 200 x 124 Analog outputs 0-10 VDC,or 2-10 VDC (4-20 mA with 500 ohm only for the level of technology necessary for their application. programmable maximum load level impedance).Proportional to speed and load 5 240/200 3Ø 15.2/17.5 M(*)250B 7.88 x 7.86 x 5.94 200 x 200 x 151 M1250C M1250E 9.75 x 10.26 x 7.20 248 x 261 x 183 „ Dynamic brake enable/disable (dynamic braking requires option card) 480/400 3Ø 7.6/8.7 M(*)450B 7.50 x 6.12 x 5.12 190 x 155 x 130 M1450C M1450E 7.88 x 7.86 x 5.90 200 x 200 x 150 (3.7kW) Digital outputs Form C relay:2A at 28 VDC or 120 VAC 590 3Ø 6.1 M(*)551B 7.88 x 7.86 x 5.94 200 x 200 x 151 M1550C M1550E 7.88 x 7.86 x 5.90 200 x 200 x 150 Commitment to Simplicity „ Base frequency adjustment to calibrate V/Hz to motor requirements Two open-collector outputs: 40mA at 30 VDC with constant or variable torque curves 240/200 3Ø 22/25 M(*)275B 9.38 x 7.86 x 6.84 238 x 200 x 174 M1275C M1275E 11.75 x 10.26 x 8.35 298 x 261 x 212 7.5 One of the cornerstones of our design philosophy is to make our products simple to use. Technology only 480/400 3Ø 11.0/12.6 M(*)475B 9.38 x 7.86 x 6.25 238 x 200 x 159 M1475C M1475E 9.75 x 10.26 x 7.20 248 x 261 x 183 Serial communications RS485 networkable, Modbus (standard) and (5.5kW) „ Coast or ramp stopping benefits the user if it can be easily understood and applied. The SMVector’s intuitive display and EPM 590 3Ø 9.0 M(*)575B 9.38 x 7.86 x 6.25 238 x 200 x 159 M1575C M1575E 9.75 x 10.26 x 7.20 248 x 261 x 183 Metasys (optional with the M3000) „ Auto and Manual mode enable/disable technology dramatically simplifies installation, commissioning and operation for our customers. 10 240/200 3Ø 28/32 M(*)2100B 11.25 x 7.86 x 6.84 286 x 200 x 174 M12100C M12100E 13.75 x 10.26 x 8.35 349 x 261 x 212 Storage temperature -20° to 70° C „ Units display calibration and decimal point adjustment 480/400 3Ø 14.0/16.0 M(*)4100B 9.38 x 7.86 x 6.84 238 x 200 x 174 M14100C M14100E 11.75 x 10.26 x 8.35 298 x 261 x 212 (7.5kW) 590 3Ø 11.0 M(*)5100B 9.38 x 7.86 x 7.40 238 x 200 x 188 M15100C M15100E 11.75 x 10.26 x 8.35 298 x 261 x 212 Chassis -10°– 55°C „ Load meter calibration Commitment to Performance Type 1 (IP31) -10°– 50°C 15 240/200 3Ø 42/48 M(*)2150B 12.75 x 7.86 x 6.84 324 x 200 x 174 M12150C M12150E 15.75 x 10.26 x 8.35 400 x 261 x 212 „ Adjustable contrast setting for easy viewing of display from any The SMVector is in a class by itself when it comes to performance. At the heart of the SMV are sophisticated 480/400 3Ø 21/24 M(*)4150B 11.25 x 7.86 x 6.84 286 x 200 x 174 M14150C M14150E 13.75 x 10.26 x 8.35 349 x 261 x 212 Type 4 (IP65) -10°– 40°C (11kW) angle 590 3Ø 17.0 M(*)5150B 12.75 x 7.86 x 6.84 324 x 200 x 174 M15150C M15150E 13.75 x 10.26 x 8.35 349 x 261 x 212 vector algorithms that achieve new heights in torque production and speed control. This technology Type 12 (IP54) -10°– 40°C „ Load reference calibration breakthrough allows our customers to cover a full range of applications from simple speed control through 240/200 3Ø 54/62 M(*)2200B 12.75 x 10.26 x 7.74 324 x 261 x 197 M12200D ------------ 15.75 x 10.26 x 8.35 400 x 261 x 212 20 Ambient humidity Less than 95%, (non-condensing) „ Load indicating output signal selection: 0-10 VDC or 4-20 mA advanced torque and process control with the same product. 480/400 3Ø 27/31 M(*)4200B 12.75 x 7.86 x 6.84 324 x 200 x 174 M14200C M14200E 15.75 x 10.26 x 8.35 400 x 261 x 212 (15kW) 590 3Ø 22 M(*)5200B 12.75 x 7.86 x 7.40 324 x 200 x 188 M15200C M15200E 15.75 x 10.26 x 8.35 400 x 261 x 212 „ Load/speed indicating output signal calibration Maximum altitude 3300 Feet (1000 meters) w/o derating „ Four programmable terminals for speed reference and control 25 240/200 3Ø 68/78 M(*)2250B 15.75 x 10.26 x 8.35 400 x 261 x 212 M12250D ------------ 20.25 x 10.26 x 8.35 514 x 261 x 212 Our Promise Standards UL, cUL, CE(LVD) 480/400 3Ø 34/39 M(*)4250B 12.75 x 10.26 x 7.74 324 x 261 x 197 M14250D ------------ 15.75 x 10.26 x 8.35 400 x 261 x 212 (18.5kW) activation 590 3Ø 27 M(*)5250B 12.75 x 10.26 x 7.74 324 x 261 x 197 M15250D ------------ 15.75 x 10.26 x 8.35 400 x 261 x 212 At Lenze - AC Tech it is not good enough to deliver part of a promise. Our products deliver the entire package; Warranty 2 Years „ Programmable terminal for external trip activation or manual reset Price Leadership, Quality, Innovation, Simplicity and Performance. 30 240/200 3Ø 80/92 M(*)2300B 15.75 x 10.26 x 8.35 400 x 261 x 212 M12300D ------------ 20.25 x 10.26 x 8.35 514 x 261 x 212 480/400 3Ø 40/46 M(*)4300B 12.75 x 10.26 x 7.74 324 x 261 x 197 M14300D ------------ 15.75 x 10.26 x 8.35 400 x 261 x 212 (22kW) Available Enclosures 590 3Ø 32 M(*)5300B 12.75 x 10.26 x 8.25 324 x 261 x 210 M15300D ------------ 15.75 x 10.26 x 8.35 400 x 261 x 212 240/200 3Ø 120/104 M(*)2400B 25.00 x 13.00 x 10.50 635 x 330 x 212 ------------ ------------ 40 480/400 3Ø 52/60 M(*)4400B 15.75 x 10.26 x 8.35 400 x 261 x 212 M14400D ------------ 20.25 x 10.26 x 8.35 514 x 261 x 212 (30kW) 590 3Ø 41 M(*)5400B 15.75 x 10.26 x 8.35 400 x 261 x 212 M15400D ------------ 20.25 x 10.26 x 8.35 50 480/400 3Ø 65/75 M(*)4500B 19.75 x 10.26 x 8.55 502 x 261 x 217 M14500D ------------ 21.00 x 13.72 x 8.35 533 x 348 x 212 590 3Ø 52 M(*)5500B 19.75 x 10.26 x 8.55 502 x 261 x 217 M15500D ------------ 21.00 x 13.72 x 8.35 533 x 348 x 212 (37.5kW) 60 240/200 3Ø 177/154 M(*)2600B 47.00 x 16.64 x 11.85 1194 x 423 x 301 ------------ ------------ 480/400 3Ø 77/88 M(*)4600B 19.75 x 10.26 x 8.55 502 x 261 x 217 M14600D ------------ 21.00 x 13.72 x 8.35 533 x 348 x 212 (45kW) 590 3Ø 62 M(*)5600B 19.75 x 10.26 x 8.55 502 x 261 x 217 M15600D ------------ 21.00 x 13.72 x 8.35 533 x 348 x 212 480/400 3Ø 110/96 M(*)4750B 29.00 x 16.64 x 11.85 737 x 423 x 301 M14750D ------------ 37.00 x 18.00 x 13.30 940 x 457 x 338 75 (55kW) NEMA Type 1 NEMA Type 12 NEMA Type 4 NEMA Type 4X 480/400 3Ø 143/124 M(*)41000B 29.00 x 24.42 x 11.85 737 x 620 x 301 M141000D ------------ 39.00 x 26.00 x 13.30 991 x 660 x 338 A true general purpose Intended for environments that contain For “wash‑down” duty, the Identical to Type 4 (water‑tight) 100 (75kW) enclosure, the most commonly dust, oil or other airborne contaminants. enclosure is gasketed to protect but must also protect from caustic used in industry. The Type The Type 12 enclosure is gasketed the electronics from water agents. AC Tech manufactures 480/400 3Ø 179/156 M(*)41250B 29.00 x 24.42 x 11.85 737 x 620 x 301 M141250D ------------ 39.00 x 26.00 x 13.30 991 x 660 x 338 125 1 enclosure allows for a to protect the electronics. AC Tech sprayed directly on and around these drives using stainless‑steel (90kW) free exchange of air to keep recommends the Type 4 enclosure for the drive, typically to keep enclosures and anodized heat sinks 480/400 3Ø 207/180 M(*)41500B 29.00 x 36.66 x 11.85 737 x 931 x 301 ------------ ------------ 150 the electronics cool while this duty in the smaller power sizes as the equipment clean. And no which provide superior heat transfer (110kW) keeping the enclosure size we can provide the higher degree of cooling fans are needed. and greater structural integrity. to a minimum. Installation protection at the same price. Type 12 must be in a relatively clean is available in the higher sizes where NEMA 1 environment. Type 4 would be cost prohibitive. Note 1: “M(*)” signifies either M1 for the M1000 series or M3 for M3000 series. NEMA 4 and NEMA12 Note 2: Replace the “M1” at the beginning of the model number with “M3” to specify a M3000 series drive. Note 3: Model numbers ending with “C” are suitable for NEMA 4 and NEMA 12 applications. AC Variable Frequency Drives | Servo Drives & Motors | Gear Reducers | Integral Gear Motors | Clutches & Brakes | Machine Automation Note 4: Model numbers ending with “D” are suitable for NEMA 12 applications. (Blue guide line is trim line) For Sales and Support, Contact Walker EMD • Toll-free: (800) 876-4444 • Tel: (203) 426-7700 • Fax: (203) 426-7800 • www.walkeremd.com MC Series Our promise MC Series Specifications, Enclosures & Tools MC Series Ratings & Dimensions Specifications System Protection HP Voltage Input 3 Phase NEMA 1 H x W x D H x W x D NEMA 4 & NEMA 4X H x W x D H x W x D Commitment to Value Phase Output Model (inches) (mm) 12 Model Model (inches) (mm) „ Input line voltage calibration: automatically or manually optimizes Output wave form High carrier frequency, sine coded,pulse width Amps (See Note 1) (See Notes) over and under voltage trip levels The finest product at the best price is serious business. It takes continuous life cycle management to modulated (PWM) 2 0.25 240/120 1Ø 1.4 M(*)103SB 7.50 x 4.70 x 3.33 190 x 119 x 85 M1103SC M1103SE 7.88 x 6.12 x 3.63 200 x 155 x 92 achieve this goal. We are always investigating techniques to improve efficiency and take advantage of the „ Thermal overload: Inverse I t motor thermal protection (0.18kW) Input voltage ratings 240/120,240/200, 480/400,590/480 VAC latest microprocessor and power module technology. When we achieve efficiency gains or material cost „ Two critical frequency avoidance ranges: with adjustable bandwith 240/120 1Ø 2.2 M(*)105SB 7.50 x 6.12 x 3.63 190 x 155 x 92 M1105SC M1105SE 7.88 x 7.86 x 3.75 200 x 200 x 95 reductions, we pass those savings on to our customers. This simple philosophy has permitted us to build 0.5 Input voltage tolerance +10%,-15% of rating „ Programmable automatic restarting after fault for unattended 240 1Ø 2.2 M(*)205SB 7.50 x 4.70 x 3.63 190 x 119 x 92 M1205SC M1205SE 7.88 x 6.12 x 4.35 200 x 155 x 110 (0.37kW) and maintain a very loyal base of customers. applications 240/200 3Ø 2.2/2.5 M(*)205B 7.50 x 4.70 x 3.63 190 x 119 x 92 M1205C M1205E 7.88 x 6.12 x 4.35 200 x 155 x 110 Input frequency tolerance 48 to 62 Hz „ Speed reference selection: keypad or analog input 1 240/120 1Ø 4.0 M(*)110SB 7.50 x 6.12 x 4.22 190 x 155 x 107 M1110SC M1110SE 7.88 x 7.86 x 4.90 200 x 200 x 124 Output frequency 0-650 Hz (optional to 1000 Hz on M1000) Commitment to Quality „ Password protection: enable/disable and setting (0000-9999) 240 1Ø 4.0 M(*)210SB 7.50 x 4.70 x 4.33 190 x 119 x 110 M1210SC M1210SE 7.88 x 6.12 x 4.35 200 x 155 x 110 (0.75kW) 240/200 3Ø 4.0/4.6 M(*)210B 7.50 x 4.70 x 4.33 190 x 119 x 110 M1210C M1210E 7.88 x 6.12 x 4.35 200 x 155 x 110 Carrier frequency 2.5 kHz to 14 kHz (Drive rated at 8 kHz) „ Monitor mode: enable/disable allows view-only of password From product design to manufacture, service and training, quality is at the foundation of Lenze-AC Tech’s 480/400 3Ø 2.0/2.3 M(*)410B 7.50 x 4.70 x 3.63 190 x 119 x 92 M1410C M1410E 7.88 x 6.12 x 4.35 200 x 155 x 110 protected parameter settings corporate philosophy. A quality product is built of superior materials by highly skilled personnel equipped 590 3Ø 1.6 M(*)510B 7.50 x 4.70 x 3.63 190 x 119 x 92 M1510C M1510E 7.88 x 6.12 x 4.35 200 x 155 x 110 Frequency stability +0.00006% / °C with state-of-the art instruments. And a quality product is backed by expert training, knowledgeable sales „ Parameter reset: reset to factory defaults (choice of 50 Hz or 60 Hz 1.5 240/120 1Ø 5.2 M(*)115SB 7.50 x 6.12 x 4.22 190 x 155 x 107 M1115SC M1115SE 7.88 x 7.86 x 4.90 200 x 200 x 124 Overload current capacity 180% for 30 seconds, 150% for one minute (at 8 kHz) factory settings) representatives and experienced repair personnel. Continuous life cycle improvement fueled by our pledge 240 1Ø 5.2 M(*)215SB 7.50 x 6.12 x 4.22 190 x 155 x 107 M1215SC M1215SE 7.88 x 7.86 x 4.90 200 x 200 x 124 (1.1kW) 240/200 3Ø 5.2/6.0 M(*)215B 7.50 x 4.70 x 4.33 190 x 119 x 110 M1215C M1215E 7.88 x 6.12 x 5.25 200 x 155 x 133 to our Customers drives our technology forward. We feel so strongly about quality that each MC Drive is Service factor 1.0 „ Fault history: View log of eight previous trips with drive status at time of trip backed with a two-year warranty. 240 1Ø 6.8 M(*)220SB 7.50 x 6.12 x 5.12 190 x 155 x 130 M1220SC M1220SE 7.88 x 7.86 x 4.90 200 x 200 x 124 2 Power factor Near unity 240/200 3Ø 6.8/7.8 M(*)220B 7.50 x 6.12 x 5.12 190 x 155 x 130 M1220C M1220E 7.88 x 7.86 x 4.90 200 x 200 x 124 „ Fault history reset (1.5kW) 480/400 3Ø 3.4/3.9 M(*)420B 7.50 x 6.12 x 4.22 190 x 155 x 107 M1420C M1420E 7.88 x 7.86 x 4.90 200 x 200 x 124 Efficiency Up to 98.5% Commitment to Innovation 590 3Ø 2.7 M(*)520B 7.50 x 6.12 x 4.22 190 x 155 x 107 M1520C M1520E 7.88 x 7.86 x 4.90 200 x 200 x 124 World Class Control Speed reference follower 0-10 VDC or 4-20 mA „ Four preset speeds 3 240 1Ø 9.6 M(*)230SB 7.50 x 6.12 x 5.12 190 x 155 x 130 M1230SC M1230SC 7.88 x 7.86 x 5.90 200 x 200 x 150 We pride ourselves on delivering products to the market that are designed to meet specific customer 240/200 3Ø 9.6/11.0 M(*)230B 7.50 x 6.12 x 5.12 190 x 155 x 130 M1230C M1230C 7.88 x 7.86 x 5.90 200 x 200 x 150 (2.2kW) Control voltage 15 VDC needs. Our portfolio of innovative products is broad and covers very simple variable speed applications up „ Independent Accel and Decel 240/400 3Ø 4.8/5.5 M(*)430B 7.50 x 6.12 x 5.12 190 x 155 x 130 M1430C M1430C 7.88 x 7.86 x 4.90 200 x 200 x 124 through complex motion control. Each product, including the SMVector, is positioned so our customers pay „ DC injection braking timed or continuous on starting or stopping with 590 3Ø 3.9 M(*)530B 7.50 x 6.12 x 5.12 190 x 155 x 130 M1530C M1530C 7.88 x 7.86 x 4.90 200 x 200 x 124 Analog outputs 0-10 VDC,or 2-10 VDC (4-20 mA with 500 ohm only for the level of technology necessary for their application. programmable maximum load level impedance).Proportional to speed and load 5 240/200 3Ø 15.2/17.5 M(*)250B 7.88 x 7.86 x 5.94 200 x 200 x 151 M1250C M1250E 9.75 x 10.26 x 7.20 248 x 261 x 183 „ Dynamic brake enable/disable (dynamic braking requires option card) 480/400 3Ø 7.6/8.7 M(*)450B 7.50 x 6.12 x 5.12 190 x 155 x 130 M1450C M1450E 7.88 x 7.86 x 5.90 200 x 200 x 150 (3.7kW) Digital outputs Form C relay:2A at 28 VDC or 120 VAC 590 3Ø 6.1 M(*)551B 7.88 x 7.86 x 5.94 200 x 200 x 151 M1550C M1550E 7.88 x 7.86 x 5.90 200 x 200 x 150 Commitment to Simplicity „ Base frequency adjustment to calibrate V/Hz to motor requirements Two open-collector outputs: 40mA at 30 VDC with constant or variable torque curves 240/200 3Ø 22/25 M(*)275B 9.38 x 7.86 x 6.84 238 x 200 x 174 M1275C M1275E 11.75 x 10.26 x 8.35 298 x 261 x 212 7.5 One of the cornerstones of our design philosophy is to make our products simple to use. Technology only 480/400 3Ø 11.0/12.6 M(*)475B 9.38 x 7.86 x 6.25 238 x 200 x 159 M1475C M1475E 9.75 x 10.26 x 7.20 248 x 261 x 183 Serial communications RS485 networkable, Modbus (standard) and (5.5kW) „ Coast or ramp stopping benefits the user if it can be easily understood and applied. The SMVector’s intuitive display and EPM 590 3Ø 9.0 M(*)575B 9.38 x 7.86 x 6.25 238 x 200 x 159 M1575C M1575E 9.75 x 10.26 x 7.20 248 x 261 x 183 Metasys (optional with the M3000) „ Auto and Manual mode enable/disable technology dramatically simplifies installation, commissioning and operation for our customers. 10 240/200 3Ø 28/32 M(*)2100B 11.25 x 7.86 x 6.84 286 x 200 x 174 M12100C M12100E 13.75 x 10.26 x 8.35 349 x 261 x 212 Storage temperature -20° to 70° C „ Units display calibration and decimal point adjustment 480/400 3Ø 14.0/16.0 M(*)4100B 9.38 x 7.86 x 6.84 238 x 200 x 174 M14100C M14100E 11.75 x 10.26 x 8.35 298 x 261 x 212 (7.5kW) 590 3Ø 11.0 M(*)5100B 9.38 x 7.86 x 7.40 238 x 200 x 188 M15100C M15100E 11.75 x 10.26 x 8.35 298 x 261 x 212 Chassis -10°– 55°C „ Load meter calibration Commitment to Performance Type 1 (IP31) -10°– 50°C 15 240/200 3Ø 42/48 M(*)2150B 12.75 x 7.86 x 6.84 324 x 200 x 174 M12150C M12150E 15.75 x 10.26 x 8.35 400 x 261 x 212 „ Adjustable contrast setting for easy viewing of display from any The SMVector is in a class by itself when it comes to performance. At the heart of the SMV are sophisticated 480/400 3Ø 21/24 M(*)4150B 11.25 x 7.86 x 6.84 286 x 200 x 174 M14150C M14150E 13.75 x 10.26 x 8.35 349 x 261 x 212 Type 4 (IP65) -10°– 40°C (11kW) angle 590 3Ø 17.0 M(*)5150B 12.75 x 7.86 x 6.84 324 x 200 x 174 M15150C M15150E 13.75 x 10.26 x 8.35 349 x 261 x 212 vector algorithms that achieve new heights in torque production and speed control. This technology Type 12 (IP54) -10°– 40°C „ Load reference calibration breakthrough allows our customers to cover a full range of applications from simple speed control through 240/200 3Ø 54/62 M(*)2200B 12.75 x 10.26 x 7.74 324 x 261 x 197 M12200D ------------ 15.75 x 10.26 x 8.35 400 x 261 x 212 20 Ambient humidity Less than 95%, (non-condensing) „ Load indicating output signal selection: 0-10 VDC or 4-20 mA advanced torque and process control with the same product. 480/400 3Ø 27/31 M(*)4200B 12.75 x 7.86 x 6.84 324 x 200 x 174 M14200C M14200E 15.75 x 10.26 x 8.35 400 x 261 x 212 (15kW) 590 3Ø 22 M(*)5200B 12.75 x 7.86 x 7.40 324 x 200 x 188 M15200C M15200E 15.75 x 10.26 x 8.35 400 x 261 x 212 „ Load/speed indicating output signal calibration Maximum altitude 3300 Feet (1000 meters) w/o derating „ Four programmable terminals for speed reference and control 25 240/200 3Ø 68/78 M(*)2250B 15.75 x 10.26 x 8.35 400 x 261 x 212 M12250D ------------ 20.25 x 10.26 x 8.35 514 x 261 x 212 Our Promise Standards UL, cUL, CE(LVD) 480/400 3Ø 34/39 M(*)4250B 12.75 x 10.26 x 7.74 324 x 261 x 197 M14250D ------------ 15.75 x 10.26 x 8.35 400 x 261 x 212 (18.5kW) activation 590 3Ø 27 M(*)5250B 12.75 x 10.26 x 7.74 324 x 261 x 197 M15250D ------------ 15.75 x 10.26 x 8.35 400 x 261 x 212 At Lenze - AC Tech it is not good enough to deliver part of a promise. Our products deliver the entire package; Warranty 2 Years „ Programmable terminal for external trip activation or manual reset Price Leadership, Quality, Innovation, Simplicity and Performance. 30 240/200 3Ø 80/92 M(*)2300B 15.75 x 10.26 x 8.35 400 x 261 x 212 M12300D ------------ 20.25 x 10.26 x 8.35 514 x 261 x 212 480/400 3Ø 40/46 M(*)4300B 12.75 x 10.26 x 7.74 324 x 261 x 197 M14300D ------------ 15.75 x 10.26 x 8.35 400 x 261 x 212 (22kW) Available Enclosures 590 3Ø 32 M(*)5300B 12.75 x 10.26 x 8.25 324 x 261 x 210 M15300D ------------ 15.75 x 10.26 x 8.35 400 x 261 x 212 240/200 3Ø 120/104 M(*)2400B 25.00 x 13.00 x 10.50 635 x 330 x 212 ------------ ------------ 40 480/400 3Ø 52/60 M(*)4400B 15.75 x 10.26 x 8.35 400 x 261 x 212 M14400D ------------ 20.25 x 10.26 x 8.35 514 x 261 x 212 (30kW) 590 3Ø 41 M(*)5400B 15.75 x 10.26 x 8.35 400 x 261 x 212 M15400D ------------ 20.25 x 10.26 x 8.35 50 480/400 3Ø 65/75 M(*)4500B 19.75 x 10.26 x 8.55 502 x 261 x 217 M14500D ------------ 21.00 x 13.72 x 8.35 533 x 348 x 212 590 3Ø 52 M(*)5500B 19.75 x 10.26 x 8.55 502 x 261 x 217 M15500D ------------ 21.00 x 13.72 x 8.35 533 x 348 x 212 (37.5kW) 60 240/200 3Ø 177/154 M(*)2600B 47.00 x 16.64 x 11.85 1194 x 423 x 301 ------------ ------------ 480/400 3Ø 77/88 M(*)4600B 19.75 x 10.26 x 8.55 502 x 261 x 217 M14600D ------------ 21.00 x 13.72 x 8.35 533 x 348 x 212 (45kW) 590 3Ø 62 M(*)5600B 19.75 x 10.26 x 8.55 502 x 261 x 217 M15600D ------------ 21.00 x 13.72 x 8.35 533 x 348 x 212 480/400 3Ø 110/96 M(*)4750B 29.00 x 16.64 x 11.85 737 x 423 x 301 M14750D ------------ 37.00 x 18.00 x 13.30 940 x 457 x 338 75 (55kW) NEMA Type 1 NEMA Type 12 NEMA Type 4 NEMA Type 4X 480/400 3Ø 143/124 M(*)41000B 29.00 x 24.42 x 11.85 737 x 620 x 301 M141000D ------------ 39.00 x 26.00 x 13.30 991 x 660 x 338 A true general purpose Intended for environments that contain For “wash‑down” duty, the Identical to Type 4 (water‑tight) 100 (75kW) enclosure, the most commonly dust, oil or other airborne contaminants. enclosure is gasketed to protect but must also protect from caustic used in industry. The Type The Type 12 enclosure is gasketed the electronics from water agents. AC Tech manufactures 480/400 3Ø 179/156 M(*)41250B 29.00 x 24.42 x 11.85 737 x 620 x 301 M141250D ------------ 39.00 x 26.00 x 13.30 991 x 660 x 338 125 1 enclosure allows for a to protect the electronics. AC Tech sprayed directly on and around these drives using stainless‑steel (90kW) free exchange of air to keep recommends the Type 4 enclosure for the drive, typically to keep enclosures and anodized heat sinks 480/400 3Ø 207/180 M(*)41500B 29.00 x 36.66 x 11.85 737 x 931 x 301 ------------ ------------ 150 the electronics cool while this duty in the smaller power sizes as the equipment clean. And no which provide superior heat transfer (110kW) keeping the enclosure size we can provide the higher degree of cooling fans are needed. and greater structural integrity. to a minimum. Installation protection at the same price. Type 12 must be in a relatively clean is available in the higher sizes where NEMA 1 environment. Type 4 would be cost prohibitive. Note 1: “M(*)” signifies either M1 for the M1000 series or M3 for M3000 series. NEMA 4 and NEMA12 Note 2: Replace the “M1” at the beginning of the model number with “M3” to specify a M3000 series drive. Note 3: Model numbers ending with “C” are suitable for NEMA 4 and NEMA 12 applications. AC Variable Frequency Drives | Servo Drives & Motors | Gear Reducers | Integral Gear Motors | Clutches & Brakes | Machine Automation Note 4: Model numbers ending with “D” are suitable for NEMA 12 applications. (Blue guide line is trim line) For Sales and Support, Contact Walker EMD • Toll-free: (800) 876-4444 • Tel: (203) 426-7700 • Fax: (203) 426-7800 • www.walkeremd.com MC Series Drives MC Series Features and Benefi ts Worldwide Coverage We’re everywhere you are The M1000 industrial drives The M3000 industrial drives The intelligent, versatile and cost-effective choice for industrial The choice when your process control demands fast applications. acceleration and response. Growth requires drive. Competitive, committed and From harsh environments to high torque loads, the M1000 Designed expressly for use where the motor control is an consistent drive. At Lenze-AC Tech we concentrate 110% Series microdrives meet the toughest requirements with integral part of a process, the M3000 is rated of our energies on providing our Customers outstanding reliability, at a low cost. The easy-to-program for constant torque applications but can easily be confi gured with everything “from the load up”. M1000 offers full features, extensive I/O, and a full array of for variable torque applications. Flexible, simple, rugged, robust! programmable functions. The M1000 is available in a power Most “process control” drives are designed for variable range of 1/4 to 150 HP (0.18 - 110 kW) and voltages ranging torque applications where the motor is driving a centrifugal from 115 to 575 VAC. fan or pump. As such, these drives are limited to 110% “Customer Service has always been and With its Enhanced Torque System (ETS), a highly effi cient sine current for overload situations such as acceleration or coding algorithm and “auto-voltage boost,” the M1000 delivers responding to a feedback change. will always be our number one commitment. maximum starting and accelerating torque and tight speed The MC3000 is a true Constant Torque drive rated for 180% Our success depends on it.” regulation, even under fl uctuating load conditions. A built-in, of rated current for 30 seconds and 150% for one minute; UL-approved thermal overload provides full motor protection. this allows faster response to system changes and the ability to apply the MC3000 to non-centrifugal applications such as M1000 drive features compressors, conveyors and other “constant torque” loads. „ Manual boost for high starting torque Driving design technology forward means we never stop The M3000 is available in the same power ranges and „ Auto-boost for high torque acceleration at any speed thinking about process improvements. Did we deliver a qual- voltages as the M1000. „ Adjustable units display: Hz, RPM, %, /SEC, /MIN, /HR ity product to market that meets the Customer’s needs? That M3000 drive features „ Slip compensation for tight speed regulation even under is the key. „ Speed synchronized automatic restart after fault fluctuating loads „ Loss of follower signal action: fault or go to preset speed „ Control configuration: local, remote, both, serial communications „ Control configuration: local, remote, serial communications, keypad, terminal strip, PID mode „ Auxiliary outputs - two open collector outputs and a Form Innovation takes art and skill to combine what’s C relay. Functions include: Run, Fault, Inverse Fault, Fault „ Adjustable units display: PSI, CFM, GPM, FPM, IN, FT, new and what’s proven to produce a product with Lockout, At Commanded Speed, Above a Preset Speed, Hz, RPM, %, /SEC, /MIN, /HR exceptional form, fi t and function. Current Limit, Auto/ Manual Mode Indication, „ Auxiliary outputs - two open collector outputs and a Form PID High/Low Alarms C relay: Functions include Loss of Speed Reference ® „ Modbus Serial Communication Protocol Signal in addition to those listed for the M1000. „ Sleep mode with adjustable speed threshold and time. M1000 and M3000 options ® „ Metasys Serial Communication Protocol (optional) Expand the capabilities of your MC drive with the following options. All options can be factory installed or fi eld installed. „ Modbus Serial Communication Protocol (standard) „ Dynamic Braking: for faster stopping or deceleration Industrial Drives and Controls... That’s All We Do! „ Additional Form-C relay „ Remote Keypad „ PID: direct or reverse acting with adjustable Proportional, Integral, and Derivative gains, signal calibration, high and low level alarms. Display that makes sense The MC Series keypad display has been designed to make it easy to understand what is happening with the AC motor that is driving your machine or process. Motor frequency (Hz) may not make as much sense to your operator as motor speed (rpm) or conveyor speed (fpm) or fl ow rate A Global Drives Company (gpm). Displays can be confi gured to show what you need to see, in the units that you need to see them in. Because www.lenze-actech.com our displays are in English, programming the MC is easy to understand, often eliminating the need to have the manual 1-800-217-9100 in one hand while programming with the other! 1-508-278-9100 +44 (0) 1743 464309 CB-MC-0209 For Sales and Support, Contact Walker EMD • Toll-free: (800) 876-4444 • Tel: (203) 426-7700 • Fax: (203) 426-7800 • www.walkeremd.com MC Series Drives MC Series Features and Benefi ts Worldwide Coverage We’re everywhere you are The M1000 industrial drives The M3000 industrial drives The intelligent, versatile and cost-effective choice for industrial The choice when your process control demands fast applications. acceleration and response. Growth requires drive. Competitive, committed and From harsh environments to high torque loads, the M1000 Designed expressly for use where the motor control is an consistent drive. At Lenze-AC Tech we concentrate 110% Series microdrives meet the toughest requirements with integral part of a process, the M3000 is rated of our energies on providing our Customers outstanding reliability, at a low cost. The easy-to-program for constant torque applications but can easily be confi gured with everything “from the load up”. M1000 offers full features, extensive I/O, and a full array of for variable torque applications. Flexible, simple, rugged, robust! programmable functions. The M1000 is available in a power Most “process control” drives are designed for variable range of 1/4 to 150 HP (0.18 - 110 kW) and voltages ranging torque applications where the motor is driving a centrifugal from 115 to 575 VAC. fan or pump. As such, these drives are limited to 110% “Customer Service has always been and With its Enhanced Torque System (ETS), a highly effi cient sine current for overload situations such as acceleration or coding algorithm and “auto-voltage boost,” the M1000 delivers responding to a feedback change. will always be our number one commitment. maximum starting and accelerating torque and tight speed The MC3000 is a true Constant Torque drive rated for 180% Our success depends on it.” regulation, even under fl uctuating load conditions. A built-in, of rated current for 30 seconds and 150% for one minute; UL-approved thermal overload provides full motor protection. this allows faster response to system changes and the ability to apply the MC3000 to non-centrifugal applications such as M1000 drive features compressors, conveyors and other “constant torque” loads. „ Manual boost for high starting torque Driving design technology forward means we never stop The M3000 is available in the same power ranges and „ Auto-boost for high torque acceleration at any speed thinking about process improvements. Did we deliver a qual- voltages as the M1000. „ Adjustable units display: Hz, RPM, %, /SEC, /MIN, /HR ity product to market that meets the Customer’s needs? That M3000 drive features „ Slip compensation for tight speed regulation even under is the key. „ Speed synchronized automatic restart after fault fluctuating loads „ Loss of follower signal action: fault or go to preset speed „ Control configuration: local, remote, both, serial communications „ Control configuration: local, remote, serial communications, keypad, terminal strip, PID mode „ Auxiliary outputs - two open collector outputs and a Form Innovation takes art and skill to combine what’s C relay. Functions include: Run, Fault, Inverse Fault, Fault „ Adjustable units display: PSI, CFM, GPM, FPM, IN, FT, new and what’s proven to produce a product with Lockout, At Commanded Speed, Above a Preset Speed, Hz, RPM, %, /SEC, /MIN, /HR exceptional form, fi t and function. Current Limit, Auto/ Manual Mode Indication, „ Auxiliary outputs - two open collector outputs and a Form PID High/Low Alarms C relay: Functions include Loss of Speed Reference ® „ Modbus Serial Communication Protocol Signal in addition to those listed for the M1000. „ Sleep mode with adjustable speed threshold and time. M1000 and M3000 options ® „ Metasys Serial Communication Protocol (optional) Expand the capabilities of your MC drive with the following options. All options can be factory installed or fi eld installed. „ Modbus Serial Communication Protocol (standard) „ Dynamic Braking: for faster stopping or deceleration Industrial Drives and Controls... That’s All We Do! „ Additional Form-C relay „ Remote Keypad „ PID: direct or reverse acting with adjustable Proportional, Integral, and Derivative gains, signal calibration, high and low level alarms. Display that makes sense The MC Series keypad display has been designed to make it easy to understand what is happening with the AC motor that is driving your machine or process. Motor frequency (Hz) may not make as much sense to your operator as motor speed (rpm) or conveyor speed (fpm) or fl ow rate A Global Drives Company (gpm). Displays can be confi gured to show what you need to see, in the units that you need to see them in. Because www.lenze-actech.com our displays are in English, programming the MC is easy to understand, often eliminating the need to have the manual 1-800-217-9100 in one hand while programming with the other! 1-508-278-9100 +44 (0) 1743 464309 CB-MC-0209 For Sales and Support, Contact Walker EMD • Toll-free: (800) 876-4444 • Tel: (203) 426-7700 • Fax: (203) 426-7800 • www.walkeremd.com