XVME-244 64-channel Isolated Digital I/O Module The
XVME-244 is an isolated 64-channel, Digital I/O module for use in
VMEbus systems. Thirty-two input channels and thirty-two output channels
are provided arranged in groups of eight. Each 8-bit pport is isolated
from the others and also from the VMEbus. - 32 optically-isolated Digital Input channels
- 32 optically-isolated Digital Output channels
- Group-to-group and Group-to-VMEbus isolation
- Input debouncing circuitry
- Reverse bias protection on all inputs
80-CH TTL I/O | | XVME-240 80-channel TTL I/O Module The
XVME-240 is an 80-channel, TTL-level, VMEbus-compatible I/O module.
Sixty-four of these channels are arranged to form eight (byte-wide)
bidirectional I/O ports. Each port can be separately programmed for
either input or output by simply setting or clearing a single
corresponding bit in the port direction register. Each channel also has
one edge selectable interrupt input line and one flag output. - 64 channels (8 ports) of bidirectional TTL I/O
- 8 channels of edge-selectable interrupt inputs with programmable mask
- 8 channels of flag outputs
- High density, low cost-per-channel
REFERENCE LIBRARY: | |
Intel. Counter | | XVME-230 Intelligent Counter Module The
XVME-230 Intelligent Counter Module is a VMEbus-compatible intelligent
I/O module which provides a variety of high-performance, high-level
counting functions. The module's architecture features the Xycom
Automation intelligent I/O kernel which can significantly enhance system
performance by itself handling many time-consuming functions that would
otherwise be performed by the host processor. This on-board
intelligence also gives the XVME-230 exceptional measurement and stepper
motor control performance. - On-board CPU
- 16 independent counting channels
- Counting rates up to 5 MHz
- Firmware-selected functions
- Measurement
- Period
- Frequency
- Pulse width
- Position
- Control
- Utility
- Frequency output
- One-shot output
- Frequency division
- Periodic interrupt
| |
32-CH Isol. IN | | XVME-212 32-channel Isolated Digital Input Module The
XVME-212 Module provides 32 optically-isolated digital input channels.
This module features programmable scanner circuitry that can detect a
change-of-state on any of the 32 input channels. The XVME-212 eliminates
the need for the host processor to constantly poll the digital I/O to
obtain signal transition data. Upon an input transition, the module can
notify the host processor by generating a VMEbus interrupt. - 32 optically-isolated digital input channels
- Programmable scanner
- VMEbus interrupt capability
- Input debouncing circuitry
- Reverse bias protection
- Isolated 12-volt supply
| |
Counter w/ Quad | | XVME-203/293 Counter Module with Quadrature The
XVME-203 is a single-high (3U), VMEbus-compatible board, using two
AM9513A timer/counter devices to provide a total of ten 16-bit counting
channels. The timer/counter devices are fully programmable and capable
of counting at a rate of up to 5 MHz. In conjunction with the
timer/counter devices, the XVME-203 employs an AM9519A Universal
Interrupt Controller to provide a complete interrupt structure via eight
interrupt channels. This interrupt structure allows for the selection
of either a fixed interrupt vector for all eight channels or a separate
vector for each individual channel. - Single Eurocard (3U) size
- Ten 16-bit counting channels
- Counting rates up to 5 mHz
- Buffered inputs and outputs
- On-board Quadrature Detection circuitry
- VMEbus interrupts
| |
PAMUX | | XVME-202 PAMUX Module The
XVME-202 PAMUX Controller Module is a single-high (3U)
VMEbus-compatible interface to the PAMUX 4, 5, and 6 remote I/O products
available from OPTO 22. - Directly compatible with the OPTO 22 line of PAMUX 4, 5, and 6 I/O systems
- 116 PAMUX units can be addressed from one XVME-202 module, providing up to 512 individual control points
- Cable length between the XVME-202 and the PAMUX units can be up to 500 feet
| |
32-CH TTL I/O |
| XVME-200/290 32-channel TTL I/O Module The
XVME-200/290 are VMEbus-compatible Digital I/O Modules with 32 channels
of TTL-level I/O, as well as two 24-bit timers. The XVME-200 is a
single-high (3U) VMEbus module with front panel I/O. The XVME-290 is a
6U VMEbus module with the I/O routed to the VMEbus P2 connector. - Low-cost digital I/O
- 68230 PI/T chips
- Buffered inputs and outputs
- Handshaking
- VMEbus interrupts
- Two 24-bit timers
| |
|