XVME-113 RAM/ROM Memory Module The
XVME-113 RAM/ROM Memory Module is a double-high (6U), VMEbus-compatible
board. It can accommodate up to 12 Mb of RAM, 24 Mb of EPROM, 12 Mb of
EEPROM or 12 Mb of FLASH. - Twenty-four 32-pin memory sockets
- Full 32-bit VMEbus slave interface
- Two independently configurable memory banks
- Supports EPROM, CMOS RAM, Flash or EEPROM
- Real Time Clock
- Battery backup for CMOS RAM devices and Real Time Clock
- Power-down memory protection circuitry
- Completely user-configurable to allow a variety of 32-pin memory device speeds and types to be used
XVME-103 XVME-103 RAM/ROM/Flash Memory Module | | | XVME-103 RAM/ROM/Flash Memory Module The
XVME-103 RAM/ROM Memory Module is a single-high (3U), VMEbus-
compatible board. It can accommodate up to 4 Mb of RAM, 8 Mb of EPROM, 4
Mb of Flash or 4 Mb of EEPROM. The module is designed with an on-board
battery backup circuit to provide power to CMOS RAM devices in the event
of a power failure. - Eight 32-pin memory sockets
- Two independently configurable memory banks (via jumpers and switches)
- Supports read modify write (RMW) cycles
- Power-down memory protection circuitry
- Battery backup for CMOS RAM devices
- Completely user-configurable, allowing a variety of memory device speeds and types to be used
- Supports EPROM, CMOS RAM, Flash or EEPROM
- Backup power monitor with front panel battery low indicator
- Front panel bank activity LEDs
| |
|
