POWER ENTRY MODULES / GERÄTESTECKER-KOMBIELEMENTE 6200/02/05, 6220 Power entry modules Types 6200/02/05, 6220 – Panel mount: – screw-on version, front or rear-side – snap-in version, front-side – Appliance inlet, fuseholder for fuses 5 x 20 mm, 1- and 2-pole –Version with line filter/shield see page 95 Types 6200, 6205 6200, 6205 Plug removal necessary for fuse replacement 1-pole 50 75 100 Types 6220 6220 Type / Typ 6202: for protection class II 2-pole Characteristics •Available with or without internal connections • Plug removal necessary for fuse-link replacement • The fuseholder is accessible from the equipment front •Types 6200/6205 with spare fuse compartment • Qualified for use in equipment according to IEC/EN 60950 Technical data Rated voltage 250 VAC Rated current 10 A Dielectric strength Types 6200/05 > 2 kV between L-N and (50 Hz, 1 Min.) Types 6220 between L/N-PE Type 6202 > 2 kV between L-N and > 4 kV between L/N-PE Allowable ambient air a temperatures T –25 °C to +70 °C Degree of protection (front side) IP 40 acc. to IEC 60529 Protection class suitable for equipment with protection class I and II acc. to IEC 61140 Terminals Solder 3,5 x 0,8 mm or quick-connect 4,8 x 0,8 mm or quick-connect 6,3 x 0,8 mm, tin-plated Panel thickness s screw-on: max. 6 mm snap-in: 1/1,5/2/2,5/3 mm Materials: Housing Thermoplastic, black, UL94 V-0 Appliance-inlet acc. to IEC/EN 60320-1/C14, protection class I, C18 protection class II pin-temperature 70 °C (cold condition) Fuseholder 1- or 2-pole, shocksafe category PC2 acc. to IEC/EN 60127-6, for fuse-links 5 x 20 mm Rated power acceptance at a ambient air temp. T 23 °C 2 W (1-pole) 1,6 W (2-pole) per pole Admissible power acceptance see derating curves. Take note of a at higher T the information on page 197 Type 6220: Patents in U.S. (No. 4, 959, 025) and in further countries www.schurter.com 33 POWER ENTRY MODULES / GERÄTESTECKER-KOMBIELEMENTE 6200/02/05, 6220 Dimensions Types 6200/02/05 Screw-on mounting Snap-in mounting Panel cut-out E: solder terminals 20,5 mm E: solder terminals 22,5 mm E: quick-connect terminals 23,5 mm E: quick-connect terminals 25,5 mm Mounting screw torque 0,5 Nm 0,5 Nm S: 1,0 / 1,5 / 2,0 / 2,5 / 3,0 mm Dimensions Type 6220 Screw-on mounting Snap-in mounting Panel cut-out E: solder terminals 20,5 mm E: solder terminals 22,5 mm E: quick-connect terminals 25,5 mm E: quick-connect terminals 23,5 mm Mounting screw torque 0,5 Nm 0,5 Nm S: 1,0 / 1,5 / 2,0 / 2,5 / 3,0 mm Derating curves for fuseholder / Derating-Kurven für G-Sicherungshalter Diagrams 1-pole 2-pole 6200/05 6220 with internal connections a Ambient air temperature Ta °C Ambient air temperature T °C Order Numbers (socket and fuse drawer) Types / Prot. class / Screw-on mounting / Schraubmontage Snap-in mounting / Schnappmontage Terminals Typen Schutzklasse with internal without internal with internal without internal solder / quick-connect connections / connections / connections / connections / 6200 6200.2100 6200.41XX • I 6200.2200 6200.42XX • 6200.2300 6200.43XX • 6205 6205.2100 6205.41XX • I 6205.2200 6205.42XX • 6205.2300 6205.43XX • 6202 6202.2100 • II 6202.2200 • 6202.2300 • 6220 6220.2100 6220.51XX • I 6220.2200 6220.52XX • 6220.2300 6220.53XX • Types for rivet mounting on request. Therefore “XX” panel thickness (s) in 1/10 mm. 10, 15, change in the order No. the 5th digit from “2” to 20, 25, 30 “9” (e.g. 6220.9300) (e.g. 6220.5210 for 1,0 mm) Accessories see page 171 34 www.schurter.com Admissible power acceptance in Watt Admissible power acceptance in Watt per pole